Red Sky Teardrop Camper Build Ep. 2

In this episode of the Red Sky Teardrop Camper build we are prepping for the cuts to be made for the doors and windows. These doors and windows will sandwich the camper wall components. We get the holes drawn and then start cutting them out. We used the Kreg track saw and a jig saw for this job.

We didn't cut out the windows due to some size difference then what was originally expected. The door was cut and once we get the window cut we can use this as a template for the other side as well as other camper builds. More on that to come. Please subscribe to the cannel to see other videos on this camper build. 

Red Sky Teardrop Camper Build Ep. 1

Hello Everyone! This is the first episode of Red Sky's Teardrop Camper build. Today we are installing the Timbren Axle-less Axle system on one of the camper trailer frames. We had previously installed some non-HD axels on a previous camper frame build, so this one went fairly quick and without a hitch.

It was a quick install and the video above shows roughly what we did. I didn't go into details on the installation but will when I start my camper build. Please like the video and subscribe to the channel to see other videos on this build.